Stone wool

TECH Loose Wool HT

Loose stone mineral wool for high-temperature industry applications

Read less

Description
Key Benefits
Technical Characteristics
Standard Dimensions
Characteristics
Applications
Documents

Description

TECH Loose Wool HT is the lightly-bonded stone mineral wool roll for insulation of dead spaces, joints, industrial mattresses fillings or other areas where preformed insulation materials cannot be used.

TECH Loose Wool HT can be flexibly used for service temperatures up to 700°C. The thermal performance will be dependent on the stuffing density and direction of the fibers towards heat source.

Key Benefits

High service temperatures
Fire reaction
Nuclear plant quality
High flexibility
Improved logistics

Technical Characteristics

	Symbol	Unit	Quantities and declared values	Standard
Specific thermal capacity	Symbolc	UnitkJ/(kg·K)	Quantities and declared values1.03	StandardISO 10456
Reaction to fire	Symbol-	Unit-	Quantities and declared valuesNon combustible; Euroclass A1 Fire Spread Index = 0; Smoke Development Index = 0	StandardEN 13501-1 ASTM E84
Water behaviour	SymbolWS	Unitkg/m²	Quantities and declared values No short term water absorption by partial immersion (WS1 ≤ 1 kg/m2)	StandardEN ISO 29767
Chemical behaviour	Symbol-	Unit-	Quantities and declared valuesDo not contribute to corrosion of stainless steel Produced without addition of silicone Especially designed and certified for use in nuclear applications	StandardASTM C795/871
Application field			Quantities and declared valuesProduct for use in technical applications, such as inaccessible cavities, complicated confined surfaces or dead spaces Especially designed and certified for use in nuclear applications	Standard-
Material			Quantities and declared valuesLoose stone mineral wool without binder With quality marks EUCEB, unrisky regarding health according to regulation EC No 1272/2008 Note Q	StandardCINI 2.2.04
Miscellaneous			Quantities and declared valuesStorage: Bags to be stored indoors in a dry and clean place away from source of humidity	Standard-
Quality management			Quantities and declared valuesISOVER is certified according to EN ISO 9001 and EN ISO 14001	StandardEN ISO 9001 EN ISO 14001
Delivery form			Quantities and declared valuesPlease contact your local ISOVER dealer All dimensions require minimum order quantities	Standard-

Thermal Conductivity

Characteristic	Symbol	Unit	Quantities and declared values									Standard
CharacteristicThermal conductivity*	SymbolT	Unit[°C]	Quantities and declared values-30	Quantities and declared values_-	Quantities and declared values__50	Quantities and declared values___100	Quantities and declared values____150	Quantities and declared values_____200	Quantities and declared values______300	Quantities and declared values_______400	Quantities and declared values________500	StandardEN 12667
CharacteristicThermal conductivity*	Symbolλ	Unit[W/(m•K)]	Quantities and declared values0.032	Quantities and declared values_0.035	Quantities and declared values__0.041	Quantities and declared values___0.048	Quantities and declared values____0.056	Quantities and declared values_____0.065	Quantities and declared values______0.088	Quantities and declared values_______0.119	Quantities and declared values________0.160	StandardEN 12667
CharacteristicThermal behaviour	SymbolT	Unit[°C]	Quantities and declared valuesOperating temperature range -200 ºC until +700 ºC									Standard-